DHK060 Through Bore Slip Ring
DHK060 Through Bore Slip Ring Description:
Ingiant IG-DHK060 Series outer diameter 130mm and inner hole diameter 60mm,6-108 rings channels each of 2A.5A,10A,15A,20A .it is constructed of a gold-plated ring and alloy brush, supports signal and power mixed transmission, can customize the number of circuits and current voltage based on standard models.
Typical Applications:
- Drying equipment (such as dryers, drying and sterilizing equipment, grain dryers, etc.),
- cast film equipment,
- three-phase AC and DC instrument calibration equipment,
- amusement facilities (such as children's ride series amusement machines, carousels),
- grinding and polishing machines,
- cranes,
- security inspection equipment,
- movie equipment,
Product Naming Method:
(1)Product type: DH—electric slip ring
(2)Installation method: K—through hole
(3)Through hole product bore diameter
(4)Total circuits
(5)The rated current or it will not be marked if it passes through a different rated current for the circuits.
(6) Identify number: --XXX; In order to distinguish different specifications of the same product model, the identification number is added after the name. For example: DHK040-40 has two sets of products with the same name, the cable length, connector, installation method, etc. are different, you can add the identification number: DHK040-40-002; if there are more of this model in the future, and so on -003 , -004, etc.
DHK060 Slip Ring 2D Standard Drawing :
If you need design more 2D or 3D drawing ,please send informations to our via email [email protected],our engineer will make it for you as soon ,thank you
DHK060 Slip Ring Technical Parameters:
|
Product Grade Table |
|||
| Product grade | Working speed | Working life | |
| General | 0～200 rpm | 20 million revolutions | |
| Industrial | 300～1000rpm | 60 million revolutions | |
| Technical Parameters | |||
| Electrical technical | Mechanical technical | ||
| Parameters | Value | Parameters | Value |
| Number of rings | Custom | Working temperature | -40℃～+65℃ |
| Rated current | 2A,5A,10A,15A,20A | Working humidity | ＜70% |
| Rated voltage | 0～240VAC/VDC | Protection level | IP54 |
| Insulation resistance | ≥1000ΜΩ@500VDC | Shell material | Aluminum Alloy |
| Insulation strength | 1500VAC@50Hz,60s,2mA | Electrical contact material | Precious metals |
| Dynamic resistance change value | ＜10mΩ | Lead specification | Colored Teflon |
| Working speed | 0-600rpm | Lead length | 500mm+20mm |
DHK060 Through Bore Slip Ring Wire Specification Table:
| Wire Specification Table | ||||
| Rated current | Wire size (AWG) |
Conductor size (mm²) |
Wire color | Wire diameter |
| ≤2A | AWG26# | 0.15 | Red, yellow, black, blue, green, white, brown, gray, orange, purple, light, red, transparent |
Φ1 |
| 3A | AWG24# | 0.2 | Red, yellow, black, blue, green, white, brown, gray, orange, purple, light, red, transparent, blue white, white red | Φ1.3 |
| 5A | AWG22# | 0.35 | Red, yellow, black, blue, green, white, brown, gray, orange, purple, light, red, transparent, blue white, white red | Φ1.3 |
| 6A | AWG20# | 0.5 | Red, yellow | Φ1.4 |
| 8A | AWG18# | 0.75 | Red, yellow, black, brown, green, white, blue, gray, orange, purple | Φ1.6 |
| 10A | AWG16# | 1.5 | Red, yellow, black, brown, green, white | Φ2.0 |
| 15A | AWG14# | 2.00 | Red, yellow, black, brown, green, white | Φ2.3 |
| 20A | AWG14# | 2.5 | Red, yellow, black, brown, green, white | Φ2.3 |
| 25A | AWG12# | 3.00 | Red, yellow, black, blue | Φ3.2 |
| 30A | AWG10# | 6.00 | Red | Φ4.2 |
| ＞30A | Use multiple AWG12# or multiple AWG10# wires in parallel | |||
Lead wire length description:
1.500+20mm (General requirement: Measure the wire length from the end face of the wire outlet hole of the inner and outer rings of the slip ring).
2.Length as required by the customer: L<1000mm, Standard L+20mm
L>1000mm, Standard L+50mm
L>5000mm, Standard L+100mm
DHK060 Series Recommend Products by Ingiant
| Item No. | Ring Number | 2A Length | 5A Length | 10A Length | 15A Length | 20A Length | 25A Length |
| DHK060-6 | 6 | 43.4 | 44.6 | 46.4 | 49.4 | 52.4 | 55.4 |
| DHK060-12 | 12 | 55.4 | 57.8 | 61.4 | 67.4 | 73.4 | 79.4 |
| DHK060-18 | 18 | 67.4 | 71 | 76.4 | 85.4 | 94.4 | 103.4 |
| DHK060-24 | 24 | 79.4 | 84.2 | 91.4 | 103.4 | 115.4 | 127.4 |
| DHK060-30 | 30 | 91.4 | 97.4 | 106.4 | 121.4 | 136.4 | 151.4 |
| DHK060-36 | 36 | 103.4 | 110.6 | 121.4 | 139.4 | 157.4 | 175.4 |
| DHK060-42 | 42 | 115.4 | 123.8 | 136.4 | 157.4 | 178.4 | - |
| DHK060-48 | 48 | 127.4 | 137 | 151.4 | 175.4 | 199.4 | - |
| DHK060-54 | 54 | 139.4 | 150.2 | 166.4 | 193.4 | - | - |
| DHK060-60 | 60 | 151.4 | 163.4 | 181.4 | 211.4 | - | - |
| DHK060-66 | 66 | 163.4 | 176.6 | 196.4 | - | - | - |
| DHK060-72 | 72 | 175.4 | 189.8 | 211.4 | - | - | - |
| DHK060-78 | 78 | 187.4 | 203 | - | - | - | - |
| DHK060-84 | 84 | 199.4 | 216.2 | - | - | - | - |
| DHK060-90 | 90 | 211.4 | 229.4 | - | - | - | - |
| DHK060-96 | 96 | 223.4 | 242.6 | - | - | - | - |
| DHK060-102 | 102 | 235.4 | - | - | - | - | - |
| DHK060-108 | 108 | 247.4 | - | - | - | - | - |
L=15.4+2*n2+2.2*n5+2.5*n10+3*n15+3.5*n20
