Factory For Wind Generator Slip Ring - Ingiant Dual Channel Coaxial Rotary Joint – Ingiant
Factory For Wind Generator Slip Ring - Ingiant Dual Channel Coaxial Rotary Joint – Ingiant Detail:
Product Description
Ingiant standard dual channel coaxial rotary joint is designed for use in military and SatCom applications. Being technically superior we offer combinations up to 50GHz. Therefore, many applications can benefit of this compact size and light weight install to airborne, land and marine applications. We distinguish basically between contacting and non-contacting designs.
Feature
Specially designed for radio frequency signal transmission, the highest frequency can reach 40GHz
Coaxial contact design makes the connector no cut-off frequency and have an ultra-wide bandwidth
Multi-contact structure, effectively reducing relative jitter
The overall size is small, the connector is plugged and used, and it is easy to install
Can Be Customized Specifications
Rated current and voltage
Rated rotating speed
Operating temperature
Number of Channels
Housing material and color
Dimensions
Dedicated wire
Wire exit direction
Wire length
Terminal type
Typical Applications
Suitable for military and civilian vehicles, radar, microwave wireless rotating platforms
|
Main parameters |
|
| Channels | Can be customized |
| Working frequency | DC~can be customized |
| Working temperature | -40°C~+70°C or others |
| Maximum rotating speed | 0~200rpm or higher |
| Insertion loss | <1dB (There will be gaps in data in different frequency bands) |
| Insertion loss variation | <0.5dB (There will be gaps in data of different frequency bands) |
| Standing wave ratio | 1.2 (There will be gaps in data of different frequency bands) |
| Standing wave change | 0.2 (There will be gaps in data of different frequency bands) |
| Structure material | Aluminum alloy |
HS-2RJ-001
|
Technical parameters |
||
| Channels | Channel 1 | Channel 2 |
| Interface type | SMA-f(50Ω) | SMA-f(50Ω) |
| Frequency range | DC~4.5GHz | DC-4.5GHz |
| Average power | 50W | 10W |
| Maximum standing wave ratio | 1.3 | 1.6 |
| Standing wave ratio fluctuation value | 0.05 | 0.1 |
| Insertion loss | 0.3dB | 0.5dB |
| Insertion loss variation | 0.05dB | 0.1dB |
| Isolation | 50dB | 50dB |
HS-2RJ-002
|
Technical parameters |
||
| Channels | Channel 1 | Channel 2 |
| Interface type | SMA-f(50Ω) | SMA-f(50Ω) |
| Frequency range | DC~4.5GHz | DC-4.5GHz |
| Average power | 100W | 10W |
| Maximum standing wave ratio | 1.2 | 1.5 |
| Standing wave ratio fluctuation value | 0.05 | 0.2 |
| Insertion loss | 0.25dB | 0.3dB |
| Insertion loss variation | 0.05dB | 0.15dB |
| Isolation | 50dB | 50dB |
Product detail pictures:
Related Product Guide:
Good quality To start with,and Purchaser Supreme is our guideline to offer the top service to our customers.Presently, we've been seeking our best to be amongst the top exporters inside our industry to fulfill consumers extra need to have for Factory For Wind Generator Slip Ring - Ingiant Dual Channel Coaxial Rotary Joint – Ingiant , The product will supply to all over the world, such as: Ghana, Brazil, United Arab emirates, We have more than 10 years exported experience and our products have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!
By Cora from Uruguay - 2018.02.12 14:52
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Ella from Albania - 2017.12.31 14:53
