OEM Customized Slip Ring 1000 Rpm - Ingiant Radio Frequency High Speed Rotary Joint – Ingiant
OEM Customized Slip Ring 1000 Rpm - Ingiant Radio Frequency High Speed Rotary Joint – Ingiant Detail:
Product Description
High frequency/microwave coaxial rotary joint is used in the 360°continuous rotation devices to transfer DC~56GHz high frequency signals. Apply for satellite antenna, vehicle, radar, microwave antenna test bench etc. It can be make to single-channel or multi-channels high frequency for transmission signal and datas, also support 1~2 channel DC~50GHz RF signals, communications, combine with power or other types of signal of slip ring is available, gas/liquid mixing transmission medium.
Feature
Specially designed for radio frequency signal transmission, the highest frequency can reach 40GHz
Coaxial contact design makes the connector have an ultra-wide bandwidth and no cut-off frequency
Multi-contact structure, effectively reducing relative jitter
The overall size is small, the connector is plugged and used, and it is easy to install
Can Be Customized Specifications
Rated current and voltage
Rated rotating speed
Operating temperature
Number of Channels
Housing material and color
Dimensions
Dedicated wire
Wire exit direction
Wire length
Terminal type
Typical Applications
Suitable for military and civilian vehicles, radar, microwave wireless rotating platforms
|
Main parameters |
|
| Channels | Can be customized |
| Working frequency | DC~can be customized |
| Working temperature | -40°C~+70°C or others |
| Maximum rotating speed | 0~200rpm or higher |
| Insertion loss | <1dB (There will be gaps in data in different frequency bands) |
| Insertion loss variation | <0.5dB (There will be gaps in data of different frequency bands) |
| Standing wave ratio | 1.2 (There will be gaps in data of different frequency bands) |
| Standing wave change | 0.2 (There will be gaps in data of different frequency bands) |
| Structure material | Aluminum alloy |
HS-1RJ-001
|
Technical parameters |
|
| Channels | Channel 1 |
| Interface type | Type-N |
| Frequency range | DC~8GHz |
| Average power | 200W |
| Maximum standing wave ratio | 1.3 |
| Standing wave ratio fluctuation value | 0.05 |
| Insertion loss | 0.4dB |
| Insertion loss variation | 0.5dB |
| Isolation | 50dB |
HS-1RJ-002
|
Technical parameters |
|
| Channels | Channel 1 |
| Interface type | SMA-f(50Ω) |
| Frequency range | DC~18GHz |
| Average power | 200W@1G 100W@8G 30W@18G |
| Maximum standing wave ratio | 1.4 |
| Standing wave ratio fluctuation value | 0.1 |
| Insertion loss | 0.6dB |
| Insertion loss variation | 0.1dB |
| Isolation | 50dB |
Product detail pictures:
Related Product Guide:
Reliable quality and good credit standing are our principles, which will help us at a top-ranking position. Adhering to the tenet of "quality first, customer supreme" for OEM Customized Slip Ring 1000 Rpm - Ingiant Radio Frequency High Speed Rotary Joint – Ingiant , The product will supply to all over the world, such as: United Kingdom, Jordan, Netherlands, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Andy from Somalia - 2018.12.25 12:43
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Julie from California - 2017.11.29 11:09
